Enabling BGP

The BGP service has a master enable/disable toggle that must be set before BGP will operate. Enable BGP using the enable command in config-frr-bgp mode:

tnsr(config)# route dynamic bgp
tnsr(config-frr-bgp)# bgp enable

To disable the service, use no enable or disable.

The BGP service is managed as described in Service Control.

Warning

After starting or restarting TNSR, restart the BGP service from within the TNSR configuration mode CLI to ensure that the routes from BGP neighbors are fully populated throughout TNSR:

tnsr(config)# service bgp restart