Tip

This is the documentation for the v21.03 version. Looking for the documentation of the latest version? Have a look here.

RIP Status¶

TNSR supports several commands to display information about the RIP daemon configuration and its status.

Configuration Information¶

To view the RIP configuration:

tnsr(config)# show route dynamic rip config
router rip
  version 2
  network TenGigabitEthernet6/0/0
  network 10.2.0.0/16
exit

Note

The configuration may be further restricted to only a single VRF with show route dynamic rip vrf <vrf-name> config.

Status Information¶

To view the RIP routing database:

tnsr(config)# show route dynamic rip
Codes: R - RIP, C - connected, S - Static, O - OSPF, B - BGP
Sub-codes:
      (n) - normal, (s) - static, (d) - default, (r) - redistribute,
      (i) - interface

     Network            Next Hop         Metric From            Tag Time
C(i) 10.2.0.0/24        0.0.0.0               1 self              0
C(i) 10.2.8.0/24        0.0.0.0               1 self              0
C(i) 10.2.222.0/24      0.0.0.0               1 self              0
R(n) 10.27.0.0/24       203.0.113.27          2 203.0.113.27      0 02:46
R(n) 10.27.8.0/24       203.0.113.27          2 203.0.113.27      0 02:46
C(i) 203.0.113.0/24     0.0.0.0               1 self              0

Note

The routing database may be further restricted to only a single VRF with show route dynamic rip vrf <vrf-name>.

To view the RIP status:

tnsr(config)# show route dynamic rip status
Routing Protocol is "rip"
  Sending updates every 30 seconds with +/-50%, next due in 12 seconds
  Timeout after 180 seconds, garbage collect after 120 seconds
  Outgoing update filter list for all interface is not set
  Incoming update filter list for all interface is not set
  Default redistribution metric is 1
  Redistributing:
  Default version control: send version 2, receive version 2
    Interface        Send  Recv   Key-chain
    GigabitEthernet3/0/02     2
    TenGigabitEthernet6/0/02     2
    ipip1            2     2
  Routing for Networks:
    10.2.0.0/16
    TenGigabitEthernet6/0/0
  Routing Information Sources:
    Gateway          BadPackets BadRoutes  Distance Last Update
    203.0.113.27             0         0       120   00:00:12
  Distance: (default is 120)

Note

The configuration may be further restricted to only a single VRF with show route dynamic rip vrf <vrf-name> status.