This is the documentation for the v21.03 version. Looking for the documentation of the latest version? Have a look here.
Network Address Translation¶
Network Address Translation, or NAT, involves changing properties of a packet as it passes through a router. Typically this is done to mask or alter the source or destination to manipulate how such packets are processed by other hosts.
The most common examples are:
Source NAT, also known as Outbound NAT, which translates the source address and port of a packet to mask its origin.
Destination NAT, commonly referred to as Static NAT or Port Forwards which translate the destination address and port of a packet to redirect the packet to a different target host behind the router.
TNSR applies NAT based on the configured mode and the presence of directives
inside (internal/local) and
inside interface is a local interface where traffic enters and it will
have its source hidden by NAT. An
outside interface is an interface where
that translation will occur as a packet exits TNSR. An example of this is shown
in Outbound NAT.
NAT is processed after ACL rules. For more information, see ACL and NAT Interaction.
NAT-specific virtual reassembly parameters have been deprecated in favor of shallow virtual reassembly. See IP Reassembly.
- NAT Modes
- NAT Global Options
- NAT Pool Addresses
- Outbound NAT
- Static NAT
- Dual-Stack Lite
- NAT Status
- NAT Examples