Netgate is offering COVID-19 aid for pfSense software users, learn more.
pfSense® software can act as a PPPoE server, accepting and authenticating connections from PPPoE clients on a local interface, in the role of an access concentrator (LAC). This feature can be used to force users to authenticate before gaining network access, or otherwise control their login behavior.
The PPPoE Server is located at Services > PPPoE Server. The configuration is very similar to the L2TP VPN server (L2TP VPN).
Multiple PPPoE servers may be configured on separate interfaces. To begin setting up a PPPoE server:
Navigate to Services > PPPoE Server
Click Add to add a new server entry
Configure the PPPoE Server as follows:
When checked, this PPPoE Server instance will be active.
The single interface upon which PPPoE service will be available.
- Total User Count
Determines how many clients in total are allowed to connect to this instance.
- User Max Logins
Determines how many times a single client may login concurrently.
- Server Address
The IP address which the pfSense system will send to the PPPoE clients to use as their gateway.
This IP address must not be an IP address currently in use on the firewall.
- Remote Address Range
The IP address for the start of the PPPoE client subnet. Together with the Subnet Mask it defines the network used by the PPPoE clients.
- Subnet Mask
Defines the CIDR mask assigned to PPPoE clients.
Optional explanatory text for this server instance.
- DNS Servers
Optional fields used to send specific DNS servers to the PPPoE clients, otherwise the firewall IP address will be sent to the client for DNS if the DNS Forwarder or DNS Resolver are enabled. If the DNS Forwarder and DNS Resolver are both disabled, then the DNS servers configured on the firewall will be sent instead.
Configure RADIUS if that will be utilized for user authentication. Any RADIUS server may be used.
See RADIUS Authentication with Windows Server for information on setting up RADIUS on a Windows server.
- Use RADIUS Authentication
Check to configure the PPPoE server to use at least one RADIUS server for Authentication instead of local users.
- Use RADIUS Accounting
Optional, sends RADIUS accounting data to the RADIUS server to note items such as login and logout times, and bandwidth used.
- Use a Backup RADIUS Authentication Server
A second RADIUS server to use if the primary RADIUS server fails.
- NAS IP Address
Optional, sends a specific IP address to the RADIUS server for the NAS-IP-Address attribute.
- RADIUS Accounting Update
The interval at which accounting data is sent to the RADIUS server, in seconds.
- RADIUS Issued IP Addresses
When checked, IP addresses can be assigned to users via RADIUS reply attributes.
- Primary RADIUS Server
The preferred RADIUS server to use for Authentication.
- IP Address
The IP address of the RADIUS server
- Authentication Port
The port used for authentication (typically
- Accounting Port
The port used for accounting data (typically
- Primary RADIUS Server Shared Secret
The shared secret configured for this firewall on the RADIUS server. The same value must be entered in the Confirm box.
- Secondary RADIUS Server
Same type of settings as the primary, but defines the secondary RADIUS server.
Add users to the server to utilize local authentication:
Click Add User
The username for the user account
The password for the user account
- IP Address
An optional static IP address to assign the user at login
Repeat as needed