Netgate is offering COVID-19 aid for pfSense software users, learn more.

Filesystem Tweaks

The default settings for the filesystem are best for most environments, however there are occasions that call for slight changes to improve stability, performance, or longevity of the filesystem.

Enabling TRIM Support

The installer for the factory version of pfSense® sets TRIM automatically. Both factory and the CE version of pfSense 2.4 support TRIM natively when using ZFS.

While it is possible to manually enable TRIM, support is unpredictable in hardware so we do not provide instructions on how to enable the feature.

Triggering a Filesystem Check

pfSense will run a filesystem check ( fsck ) at boot when it detects an unclean filesystem, typically from after a power outage or other sudden unclean reboot or shutdown. In rare cases, that isn’t always enough, as a filesystem can become corrupted in other ways that may not always leave the drive marked unclean.

In these cases:

  • Connect to the console

  • Choose the menu option to reboot from the console menu (5)

  • Enter F (uppercase “f”) to force a filesystem check during the boot sequence even if the drive is considered clean

That option is not present on all firewalls as it is not compatible with certain BIOS implementations. If that option is not present:

  • Reboot the firewall into single user mode by choosing option 2 from the boot menu

  • Press Enter when prompted for a shell

  • Enter fsck -y /

  • Repeat the command at least 3 times, or until no errors are found, even if the filesystem is reported clean