Tip
This is the documentation for the 21.07 version. Looking for the documentation of the latest version? Have a look here.
VRRP StatusΒΆ
The status of VRRP VR addresses is included in the output of
show interface [<if-name>]
. To view only the VRRP status and no other
information, use show interface [<if-name>] ip vrrp-virtual-router
for IPv4
or show interface [<if-name>] ipv6 vrrp-virtual-router
for IPv6.
r1 tnsr# show interface ip vrrp-virtual-router
Interface: TenGigabitEthernet6/0/0
IPv4 VRRP:
VR: 220
State: master, Priority: 255, Flags: Addresses: 203.0.113.2
Timers: Adv 100cs, Master down 300cs, Skew 0cs
Interface: TenGigabitEthernet6/0/1
IPv4 VRRP:
VR: 210
State: master, Priority: 255, Flags: Addresses: 198.51.100.1
Timers: Adv 100cs, Master down 300cs, Skew 0cs
r2 tnsr# show interface ip vrrp-virtual-router
Interface: TenGigabitEthernet6/0/0
IPv4 VRRP:
VR: 220
State: backup, Priority: 100, Flags: Addresses: 203.0.113.2
Timers: Adv 100cs, Master down 341cs, Skew 41cs
Interface: TenGigabitEthernet6/0/1
IPv4 VRRP:
VR: 210
State: backup, Priority: 100, Flags: Addresses: 198.51.100.1
Timers: Adv 100cs, Master down 341cs, Skew 41cs
In a properly configured cluster in a normal state, the output should be similar
to the above sample. The primary node will show master
for the state of all
configured VR addresses, and the secondary node will show backup
.