Tip
This is the documentation for the 21.07 version. Looking for the documentation of the latest version? Have a look here.
Service ControlΒΆ
Services controlled directly by TNSR can be restarted from within the TNSR CLI in configuration mode.
To control a service, use the service
command as follows:
tnsr# configure
tnsr(config)# service (backend|bgp|dataplane|dhcp|ike|ospf|ospf6|restconf|rip|unbound) <action>
tnsr(config)# service (http|ntp|prometheus|snmp|ssh) <namespace> <action>
- name:
The name of the service to configure. Must be one of:
- backend:
Configuration backend (
clixon_backend
)- bgp:
BGP routing (
bgpd
,zebra
)- dataplane:
Dataplane (
vpp
)- dhcp:
DHCP (
kea
)- http:
HTTP for RESTCONF API (
nginx
)- ike:
IKE daemon for IPsec (
charon
)- ntp:
Time service (
ntpd
)- ospf:
OSPF Routing (
ospfd
,zebra
)- ospf6:
OSPF6 Routing (
ospf6d
,zebra
)- prometheus:
Prometheus exporter (
vpp_prometheus_export
)- restconf:
RESTCONF API (
clixon_restconf
)- rip:
RIP Routing (
ripd
,zebra
)- snmp:
SNMP Server (
snmpd
)- ssh:
Secure Shell server (
sshd
)- unbound:
DNS Resolver (
unbound
)
- namespace:
Services which are capable of running in more than one namespace (Networking Namespaces) take the namespace as a second parameter. The namespace can be:
- dataplane:
Control the service instance running in the dataplane namespace This service will be reachable on interfaces and addresses managed by TNSR.
- host:
Control the service instance running in the host OS namespace. This service will be reachable on interfaces and addresses managed by the host OS.
- action:
The action to take on the service. Must be one of:
- start:
Start the service if it is not already running.
- stop:
Stop the service if it is currently running.
- restart:
Stop and restart the service, or start the service if it is not running. This action is not available for the dhcp service.
- reload:
Reload the service configuration without restarting. This action is available for the dhcp and unbound services.
- status:
Show the current status of the service daemon(s) and the last few log entries.
- coredump (enable|disable):
Enable or disable core dumps, which are generated if the service encounters a problem. See Diagnosing Service Issues.