Tip

This is the documentation for the 19.12 version. Looking for the documentation of the latest version? Have a look here.

RESTCONF Service Setup with Certificate-Based Authentication and NACM¶

Use Case ¶

RESTCONF is desirable for its ability to implement changes to TNSR remotely using the API, but allowing remote changes to TNSR also raises security concerns. When using RESTCONF, security is extremely important to protect the integrity of the router against unauthorized changes.

Note

RESTCONF deals in JSON output and input, which is easily parsed by a variety of existing libraries for programming and scripting languages.

Example Scenario ¶

In this example, TNSR will be configured to allow access via RESTCONF, but the service will be protected in several key ways:

The RESTCONF service is configured for TLS to encrypt the transport
The RESTCONF service is configured to require a client certificate, which is validated against a private Certificate Authority known to TNSR
NACM determines if the certificate common-name (username) is allowed access to view or make changes via RESTCONF

Item	Value
TNSR Hostname	tnsr.example.com
RESTCONF Username	myuser
NACM Group Name	admins
Additional User	anotheruser

TNSR Setup ¶

Generate Certificates¶

Create a self-signed Certificate Authority:

tnsr(config)# pki private-key selfca generate
tnsr(config)# pki signing-request set common-name selfca
tnsr(config)# pki signing-request set digest sha256
tnsr(config)# pki signing-request selfca generate
tnsr(config)# pki signing-request selfca sign self enable-ca true

Create a certificate for the user myuser, signed by selfca:

tnsr(config)# pki private-key myuser generate key-length 4096
tnsr(config)# pki signing-request set common-name myuser
tnsr(config)# pki signing-request set digest sha256
tnsr(config)# pki signing-request myuser generate
tnsr(config)# pki signing-request myuser sign ca-name selfca days-valid 365 digest sha512 enable-ca false

Create a certificate for the RESTCONF service to use. The common-name should be the hostname of the TNSR router, which should also exist in DNS:

tnsr(config)# pki private-key restconf generate key-length 4096
tnsr(config)# pki signing-request set common-name tnsr.example.com
tnsr(config)# pki signing-request set digest sha256
tnsr(config)# pki signing-request restconf generate
tnsr(config)# pki signing-request restconf sign ca-name selfca days-valid 365 digest sha512 enable-ca false

Setup NACM¶

Disable NACM while making changes, to avoid locking out the account making the changes:

tnsr(config)# nacm disable

Set default policies:

tnsr(config)# nacm exec-default deny
tnsr(config)# nacm read-default deny
tnsr(config)# nacm write-default deny

Setup an admin group containing the default users plus myuser, which will match the common-name of the user certificate created above:

tnsr(config)# nacm group admin
tnsr(config-nacm-group)# member root
tnsr(config-nacm-group)# member tnsr
tnsr(config-nacm-group)# member myuser
tnsr(config-nacm-group)# exit

Setup rules to permit any action by members of the admin group:

tnsr(config)# nacm rule-list admin-rules
tnsr(config-nacm-rule-list)# group admin
tnsr(config-nacm-rule-list)# rule permit-all
tnsr(config-nacm-rule)# module *
tnsr(config-nacm-rule)# access-operations *
tnsr(config-nacm-rule)# action permit
tnsr(config-nacm-rule)# exit
tnsr(config-nacm-rule-list)# exit

Enable NACM:

tnsr(config)# nacm enable
tnsr(config)# exit

Enable RESTCONF¶

Enable RESTCONF and configure it for TLS and client certificate authentication:

tnsr(config)# http server
tnsr(config-http)# server certificate restconf
tnsr(config-http)# authentication type client-certificate
tnsr(config-http)# authentication client-certificate-ca selfca
tnsr(config-http)# enable restconf

Client Configuration ¶

On TNSR, export the CA certificate, user certificate, and user certificate key. Place the resulting files in a secure place on a client system, in a directory with appropriate permissions, readable only by the user. Additionally, the private key file must only be readable by the user. For this example, the files will be placed in ~/tnsr/.

First, export the CA certificate. Copy and paste this into a local file, named tnsr-selfca.crt:

tnsr# pki ca selfca get
-----BEGIN CERTIFICATE-----
[...]
-----END CERTIFICATE-----

Next, export the user certificate, copy and paste it and save in a local file named tnsr-myuser.crt:

tnsr# pki certificate myuser get
-----BEGIN CERTIFICATE-----
[...]
-----END CERTIFICATE-----

Finally, export the user certificate private key, copy and paste it and save in a local file named tnsr-myuser.key. Remember to protect this file so it is only readable by this user:

tnsr# pki private-key myuser get
-----BEGIN PRIVATE KEY-----
[...]
-----END PRIVATE KEY-----

This example uses curl to access RESTCONF, so ensure it is installed and available on the client computer.

Example Usage ¶

This simple example shows fetching the contents of an ACL from RESTCONF as well as adding a new ACL entry. There are numerous possibilities here, for more details see the REST API documentation.

In this example, there is an existing ACL named blockbadhosts. It contains several entries including a default allow rule with a sequence number of 5000.

These examples are all run from the client configured above.

Note

This is a simple demonstration using cURL and shell commands. This makes it easy to demonstrate how the service works, and how RESTCONF URLs are formed, but does not make for a good practical example.

In real-world cases these types of queries would be handled by a program or script that interacts with RESTCONF, manipulating data directly and a lot of the details will be handled by RESTCONF and JSON programming libraries.

Retrive a specific ACL¶

Retrieve the entire contents of the blockbadhosts ACL:

Command:

$ curl --cert ~/tnsr/tnsr-myuser.crt \
  --key ~/tnsr/tnsr-myuser.key \
  --cacert ~/tnsr/tnsr-selfca.crt \
  -X GET \
  https://tnsr.example.com/restconf/data/netgate-acl:acl-config/acl-table/acl-list=blockbadhosts

Output:

{
    "acl-list": [
      {
        "acl-name": "blockbadhosts",
        "acl-description": "Block bad hosts",
        "acl-rules": {
          "acl-rule": [
            {
              "sequence": 1,
              "action": "deny",
              "src-ip-prefix": "203.0.113.14/32"
            },
            {
              "sequence": 2,
              "action": "deny",
              "src-ip-prefix": "203.0.113.15/32"
            },
            {
              "sequence": 555,
              "action": "deny",
              "src-ip-prefix": "5.5.5.5/32"
            },
            {
              "sequence": 5000,
              "acl-rule-description": "Default Permit",
              "action": "permit"
            }
          ]
        }
      }
    ]
  }

The cURL parameters and RESTCONF URL can be dissected as follows:

Item	Value
cURL Client Certificate	–cert ~/tnsr/tnsr-myuser.crt
cURL Client Certificate Key	–key ~/tnsr/tnsr-myuser.key
cURL CA Cert to validate TLS	–cacert ~/tnsr/tnsr-selfca.crt
Request type (GET)	-X GET
RESTCONF Server protocol/host	https://tnsr.example.com
RESTCONF API location:	/restconf/data/
ACL config area (prefix:name)	netgate-acl:acl-config/
ACL table	acl-table/
ACL List, with restriction	acl-list=blockbadhosts

Note

Lists of items with a unique key can be restricted as shown above. The API documentation also calls this out as well, showing an optional ={name} in the query.

Retrieve a specific rule of a specific ACL¶

View only the default permit rule of the ACL:

Command:

$ curl --cert ~/tnsr/tnsr-myuser.crt \
  --key ~/tnsr/tnsr-myuser.key \
  --cacert ~/tnsr/tnsr-selfca.crt \
  -X GET \
  https://tnsr.example.com/restconf/data/netgate-acl:acl-config/acl-table/acl-list=blockbadhosts/acl-rules/acl-rule=5000

Output:

{
    "netgate-acl:acl-rule": [
      {
        "sequence": 5000,
        "acl-rule-description": "Default Permit",
        "action": "permit"
      }
    ]
  }

The query is nearly identical to the previous one, with the following additional components:

Item	Value
ACL rules list	acl-rules/
ACL rule, with restriction	acl-rule=5000

Add a new rule to an existing ACL¶

Insert a new ACL rule entry with the following parameters:

Item	Value
Request Type	-X PUT (add content)
ACL Name	blockbadhosts
ACL Rule Sequence	10
ACL Rule Action	deny
ACL Rule Source Address	10.222.111.222/32

The new data passed in the -d parameter is JSON but with all whitespace removed so it can be more easily expressed on a command line.

The URL is the same as if the query is retrieving the rule in question.

Warning

Note the presence of the sequence number in both the supplied JSON data and in the URL. This must match.

Command:

$ curl --cert ~/tnsr/tnsr-myuser.crt \
  --key ~/tnsr/tnsr-myuser.key \
  --cacert ~/tnsr/tnsr-selfca.crt \
  -X PUT \
  -d '{"netgate-acl:acl-rule":[{"sequence": 10,"action":"deny","src-ip-prefix":"10.222.111.222/32"}]}' \
  https://tnsr.example.com/restconf/data/netgate-acl:acl-config/acl-table/acl-list=blockbadhosts/acl-rules/acl-rule=10

Output: This command has no output when it works successfully.

Retrieve the contents of the ACL again to see that the new rule is now present:

Command:

$ curl --cert ~/tnsr/tnsr-myuser.crt \
  --key ~/tnsr/tnsr-myuser.key \
  --cacert ~/tnsr/tnsr-selfca.crt \
  -X GET \
  https://tnsr.example.com/restconf/data/netgate-acl:acl-config/acl-table/acl-list=blockbadhosts

Output:

{
    "netgate-acl:acl-list": [
      {
        "acl-name": "blockbadhosts",
        "acl-description": "Block bad hosts",
        "acl-rules": {
          "acl-rule": [
            {
              "sequence": 1,
              "action": "deny",
              "src-ip-prefix": "203.0.113.14/32"
            },
            {
              "sequence": 2,
              "action": "deny",
              "src-ip-prefix": "203.0.113.15/32"
            },
            {
              "sequence": 10,
              "action": "deny",
              "src-ip-prefix": "10.222.111.222/32"
            },
            {
              "sequence": 555,
              "action": "deny",
              "src-ip-prefix": "5.5.5.5/32"
            },
            {
              "sequence": 5000,
              "acl-rule-description": "Default Permit",
              "action": "permit"
            }
          ]
        }
      }
    ]
  }

Remove a specific rule from an ACL¶

Say that entry is no longer needed and it is safe to remove. That can be done with a DELETE request for the URL corresponding to its sequence number:

Command:

$ curl --cert ~/tnsr/tnsr-myuser.crt \
  --key ~/tnsr/tnsr-myuser.key \
  --cacert ~/tnsr/tnsr-selfca.crt \
  -X DELETE \
  https://tnsr.example.com/restconf/data/netgate-acl:acl-config/acl-table/acl-list=blockbadhosts/acl-rules/acl-rule=10

Output: This does not produce any output if it completed successfully.

Retrieve the contents of the ACL again to confirm it was removed.

Adding More Users ¶

To create additional RESTCONF users, only two actions are required on TNSR: Generate a certificate for the new user, and then add the user to NACM. This example adds a new user named anotheruser.

Generate a new user certificate:

tnsr(config)# pki private-key anotheruser generate key-length 4096
tnsr(config)# pki signing-request set common-name anotheruser
tnsr(config)# pki signing-request set digest sha256
tnsr(config)# pki signing-request anotheruser generate
tnsr(config)# pki signing-request anotheruser sign ca-name selfca days-valid 365 digest sha512 enable-ca false

Add this user to the NACM admin group:

tnsr(config)# nacm group admin
tnsr(config-nacm-group)# member anotheruser
tnsr(config-nacm-group)# exit

Then, the user certificate can be copied to a new client and used as explained previously.

RESTCONF Service Setup with Certificate-Based Authentication and NACM¶

Use Case¶

Example Scenario¶

TNSR Setup¶

Generate Certificates¶

Setup NACM¶

Enable RESTCONF¶

Client Configuration¶

Example Usage¶

Retrive a specific ACL¶

Retrieve a specific rule of a specific ACL¶

Add a new rule to an existing ACL¶

Remove a specific rule from an ACL¶

Adding More Users¶

Use Case ¶

Example Scenario ¶

TNSR Setup ¶

Client Configuration ¶

Example Usage ¶

Adding More Users ¶