Tip

This is the documentation for the 24.06 version. Looking for the documentation of the latest version? Have a look here.

Configuring IPsec IKEv2 Remote Access VPN Clients on Ubuntu

This document demonstrates how to configure an IKEv2 connection on Ubuntu. This procedure was performed on Linux Mint 21.3 but the procedure is identical on most recent similar distributions.

Prerequisites

Before starting:

• Setup TNSR as an IKEv2 server as described in either IPsec Remote Access VPN using IKEv2 with EAP-TLS or IPsec Remote Access VPN using IKEv2 with EAP-RADIUS.

• Install network-manager-strongswan and libcharon-extra-plugins using apt or a similar mechanism

• Export the CA certificate (EAP-TLS or EAP-RADIUS), user certificate (EAP-TLS), and user key (EAP-TLS) as separate files and copy them to the Ubuntu client

Warning

The Network Manager configuration window for IKEv2 IPsec is quite tall and if the screen height is less than 900 pixels it may not be possible to configure and save the VPN easily. Behavior may vary with different desktop environments, window managers, etc.

Configuration

The configuration varies slightly depending on the server configuration.

EAP-TLS

• Click the Network Manager icon in the notification tray by the clock

  Note

  The icon varies depending on the type of network in use.

• Click Network Connections

• Click Add

• Select IPsec/IKEv2 (strongswan) under VPN as shown in Adding an IKEv2 VPN on Ubuntu

  

  Adding an IKEv2 VPN on Ubuntu

  Note

  If the option is not present, double check that network-manager-strongswan is installed.

• Click Create

• Select the VPN Tab

• Set the fields as follows:

  Connection Name

  A name for this connection, TNSR IKEv2 EAP-TLS.

  Address

  The FQDN or IP address of TNSR, e.g. tnsr.example.com.

  Certificate

  Click the field and browse to find the IPsec CA Certificate file.

  Identity

  Set to match a SAN of the server cert, or leave blank to use the Address value.

  Authentication

  EAP-TLS

  Certificate

  Certificate/Private Key

  Certificate File

  Click the field and browse to find the user certificate file.

  Private Key

  Click the field and browse to find the user private key file.

  Identity

  Set to match the common name of the certificate (e.g. ipsec-myuser

  Password

  Click the icon at the end of the field and set to The password is not required.

• Select the Options tab at the bottom of the window

• Set the fields as follows:

  Request an Inner IP Address

  Checked

• Select the Algorithms tab at the bottom of the window

• Set the fields as follows:

  Enable Custom algorithm proposals

  Checked

  IKE

  Set to match the TNSR config in strongSwan format, e.g. aes256gcm128-sha256-modp2048.

  ESP

  Set to match the TNSR config in strongSwan format, e.g. aes256gcm128-modp2048.

  See also

  For a list of algorithms and their equivalent strings in strongSwan, see the strongSwan document on IKEv2 Cipher Suites.

• Compare the settings to those shown in figures Ubuntu VPN Client Settings for EAP-TLS and Ubuntu VPN Client Algorithm Settings

• Click Save

• Click Close

Ubuntu VPN Client Settings for EAP-TLS

Ubuntu VPN Client Algorithm Settings

EAP-RADIUS

• Click the Network Manager icon in the notification tray by the clock

  Note

  The icon varies depending on the type of network in use.

• Click Network Connections

• Click Add

• Select IPsec/IKEv2 (strongswan) under VPN as shown in Adding an IKEv2 VPN on Ubuntu

  

  Adding an IKEv2 VPN on Ubuntu

  Note

  If the option is not present, double check that network-manager-strongswan is installed.

• Click Create

• Select the VPN Tab

• Set the fields as follows:

  Connection Name

  A name for this connection, TNSR IKEv2 EAP-RADIUS.

  Address

  The FQDN or IP address of TNSR, e.g. tnsr.example.com.

  Certificate

  Click the field and browse to find the IPsec CA Certificate file.

  Identity

  Set to match a SAN of the server cert, or leave blank to use the Address value.

  Authentication

  EAP (Username/Password)

  Username

  Enter the RADIUS username.

  Password

  Click the icon at the end of the field and set to Ask for this password every time.

  Note

  Although the client allows saving the password, the best practice is to not store credentials in this manner.

• Select the Options tab at the bottom of the window

• Set the fields as follows:

  Request an Inner IP Address

  Checked

• Select the Algorithms tab at the bottom of the window

• Set the fields as follows:

  Enable Custom algorithm proposals

  Checked

  IKE

  Set to match the TNSR config in strongSwan format, e.g. aes256gcm128-sha256-modp2048.

  ESP

  Set to match the TNSR config in strongSwan format, e.g. aes256gcm128-modp2048.

  See also

  For a list of algorithms and their equivalent strings in strongSwan, see the strongSwan document on IKEv2 Cipher Suites.

• Compare the settings to those shown in figures Ubuntu VPN Client Settings for EAP-RADIUS and Ubuntu VPN Client Algorithm Settings

• Click Save

• Click Close

Ubuntu VPN Client Settings for EAP-RADIUS

Ubuntu VPN Client Algorithm Settings

Split Tunneling

The Ubuntu IPsec client will automatically respect the traffic selectors configured on the server. The client does not require any manual adjustments.

If there are no traffic selectors on the server, the client will send all of its traffic, including Internet traffic, across the VPN.

The client includes options to override this behavior on the IPv4 and IPv6 Settings tabs under the Routes button.

Connecting and Disconnecting

To Connect:

• Click the Network Manager icon

• Click the VPN Name or click VPN Connections to move the slider to the On (1) position

To Disconnect:

• Click the Network Manager icon

• Click VPN Connections to move the slider to the Off (0) position