IPv6 WAN Types

Details can be found in IPv6 WAN Types, but some of the most common ways of deploying IPv6 are:

Static Addressing

Native and using IPv6 either on its own or in a dual stack configuration alongside IPv4.

DHCPv6

Address automatically obtained by DHCPv6 to an upstream server. Prefix delegation may also be used with DHCPv6 to deliver a routed subnet to a DHCPv6 client.

Stateless address auto configuration (SLAAC)

Automatically determines the IPv6 address by consulting router advertisement messages and generating an IP address inside a prefix. This is not very useful for a router, as there is no way to route a network for the “inside” of the firewall. It may be useful for appliance modes.

6RD Tunnel

A method of tunneling IPv6 traffic inside IPv4. This is used by ISPs for rapid IPv6 deployment.

6to4 Tunnel

Similar to 6RD but with different mechanisms and limitations.

GIF Tunnel

Not technically a direct WAN type, but commonly used. Customer builds an IPv4 GIF tunnel to a provider to tunnel IPv6 traffic.

While not technically a WAN type, IPv6 connectivity can also be arranged over OpenVPN or IPsec with IKEv2. OpenVPN and IPsec in IKEv2 mode can carry IPv4 and IPv6 traffic simultaneously, so they can deliver IPv6 over IPv4, though with more overhead than a typical tunnel broker that uses GIF. These are good options for a company that has IPv6 at a datacenter or main office but not at a remote location.