Input and Output Ports

Rear Side

../_images/sg-5100-io-ports.png

Network Ports

Netgate 5100 Network Interface Layout

Port Label

Linux Label

TNSR Label

Port Type

Port Speed

IGB0

enp3s0

GigabitEthernet3/0/0

RJ-45

1 Gbps

IGB1

enp4s0

GigabitEthernet4/0/0

RJ-45

1 Gbps

IX0

enp6s0f0

GigabitEthernet6/0/0

RJ-45

1 Gbps

IX1

enp6s0f1

GigabitEthernet6/0/1

RJ-45

1 Gbps

IX2

enp8s0f0

GigabitEthernet8/0/0

RJ-45

1 Gbps

IX3

enp8s0f1

GigabitEthernet8/0/1

RJ-45

1 Gbps

Note

Default Host OS Interface is enp3s0. The Host OS Interface is one network interface that is only available to the host OS and not available in TNSR. Though technically optional, the best practice is to have one for accessing and updating the host OS.

Status LED

State

Description

Left LED
(Link Status)

Solid Amber

Link has been established and there is no activity on this port

Blinking Amber

Link has been established and there is activity on this port

Off

No link has been established

Right LED
(Speed)

Solid Green

Operating as a 100 Mbps connection

Blinking Amber

Operating as a Gigabit connection (1000 Mbps)

Off

No link has been established

Other Ports and Indicators

  • Console (Mini-USB)

  • Status LEDs

  • 2x USB 3.0

Front Side

../_images/sg-5100-io-ports-back.png
  1. Receessed Reset Button

  2. Power Button

  3. Power (12VDC with threaded locking connector)

    ../_images/center-pin-positive-symbol.jpg

    Center Pin Positive

Note

The power button on the Netgate 5100 has been programmed to perform a graceful shutdown when depressed.