Address Family Configuration¶
tnsr(config-bgp)# address-family ipv4 unicast tnsr(config-bgp-ip4uni)# network 10.2.0.0/16 tnsr(config-bgp-ip4uni)# exit
The TNSR BGP implementation is capable of handling routing information for IPv4
and IPv6 independently, among other network layer protocols. The
address-family command defines BGP behavior for each specific supported
case. The most common address families are
ipv4 unicast and
unicast. The command changes to BGP address family mode,
contains settings specific to each address family.
In this example for the
ipv4 unicast address family, BGP is instructed to
announce a route for the
10.2.0.0/16 network prefix. Neighbors will receive
this route once they form an adjacency to this router.