Tip

This is the documentation for the 19.02 version. Looking for the documentation of the latest version? Have a look here.

ACL and NAT Interaction

When NAT is active, ACL rules are always processed before NAT on interfaces where NAT is applied, in any direction.

The remainder of the section refers to the following example static NAT rule:

nat static mapping tcp local 10.2.0.129 22 external 203.0.113.2 222

In this example, that rule is applied on the external-facing interface containing 203.0.113.2.

Inbound ACL Rules

ACL Rules set to be processed in the inbound direction on an interface (access-list input acl <name> sequence <seq>) will match on the external address and/or port in a static NAT rule. In the above example, this means an inbound ACL would match on a destination IP address of 203.0.113.2 and/or a destination port of 222.

Outbound ACL Rules

ACL Rules set to be processed in the outbound direction on an interface (access-list output acl <name> sequence <seq>) will match on the local address and/or port in a static NAT rule. In the above example, this means an outbound ACL would match on a source IP address of 10.2.0.129 and/or a source port of 22.